SCZ25-2型伸縮臂裝載機
(
[ 產品簡介 Product Introduction ]
SCZ25-2伸縮臂裝載機是一種新型裝卸機械,它備有貨叉和側移工作裝置(或貨叉和鏟斗),適合于從事成箱貨物的起重和堆垛,也可在市政工程施工中從事道路照明設備的安裝檢修等高空作業和各種底下管道(例如自來水管、煤氣管等)的安裝鋪設等作業,并能廣泛地適用于工廠、車站、碼頭、貨場、郵電、林場、建材、倉庫、物流等行業,是一種適應性廣和效率高的裝卸機械。
As a new loading/unloading machine, SCZ25-2 model telescopic loader is equipped with fork and side-shifting device (or with fork and bucket), it is suitable for hoisting and piling of goods packed in boxes, and also for such aloft work as installation and maintenance of street lighting fitting and laying-out of underground pipelines (pipeline of tap water, gas and so on) in the construction of municipal works, and it may be used widely in such sites as factories, stations, logistics terminals, goods yards, post office, forest farm, enterprises of building materials, and warehouses, and therefore it is a loading/unloading machine with wide adaptability and high efficiency.
[ 主要技術參數 Specifications ]
額定起重量 Rated load |
| |
最大外伸距時舉升重量 Lifting load (Max.extend length) |
| |
基本臂最大作業高度 Max.lifting height of basic arm |
| |
全伸臂最大作業高度 Max.lifting height of full extend arm |
| |
最大行駛速度 Max.traveling speed |
| |
最小離地間隙 Min.ground clearance |
| |
最小轉彎直徑(外輪中心) Min.turning Diameter (center of outer wheel) |
| |
爬坡度 Grade ability |
20% | |
自重 Deadweight |
| |
整機外形尺寸(長×寬×高) Overall dimension (L×W×H) |
| |
發動機(一拖東方紅) Engine (Yituo Dongfanghong) |
型號 Type |
LR |
額定功率 Rated power |
60kw | |
標定轉速 Rated speed |
2400r/min | |
輪胎 |
前輪 Front wheel |
16/70-20 |
后輪 Rear wheel |
8.25-15 |
注:由于技術改進,該數據可能與產品不符,如有誤則以產品為準。
Note:The content and performance will be revised and the products will be improve without notice.